FOR SALE

3001 Cornhusker Highway

The historic Hansen-Mueller grain elevator in Lincoln, NE is brimming
with a variety of parts and supplies available for sale.


Please Submit an Inquiry through the Contact Form, and we’ll get back to you promptly.

To Reserve Equipment Now, Click Reserve Now.

Contact Us

Fall Protections Systems
250 Linear Ft x Two Rails = 500 Linear Ft

Year: Unknown
Price: $110,000

Reserve Now
A yellow pole with full protection systems written on it
A row of silos are lined up against a cloudy sky
A building with a broken roof is sitting next to train tracks
A large building with a metal roof and stairs leading up to it.

Donaldson 24 Cartridge Dust Collector PowerCore Torit

Year: 2010

Price: (Without motor and fan) $28,000

Replacement Cost: $68,000 New

Reserve Now
A blue tank with a ladder on top of it
A blue machine with stairs leading up to it is sitting in front of a building.
A blue sign that says powercore smaller smarter collectors
A blue box that says powercore on it

VM-120 (2 Total Available)

Year: 2001 

Price: $8,000/ea.

Estimated Value:
South: VM-120 $8,000 total with motor and fan
North: VM-120 $8,000 without motor and fan. (New Fan and Motor/Data Plate to the right)

Reserve Now
A ladder is attached to the side of a building
A siemens motor has a qr code on it
A large white container with a ladder attached to it

Kice M144-10 (Railhead)
Installed in 2011
$28,000 Without Motor and Fan

Reserve Now
A staircase leading up to a large container with pipes coming out of it
A ladder is going up to the top of a building
A lamp is sitting on a table in a dirty room next to a ladder.

AirLanco C2225 Centrifugal Aerator Fans
(23 Total Available) (1 Each Broken Starter)

2 WEG, 6 TOSHIBA Motors

Year: 2002

Estimated Value: TBD

Replacement Cost New: $4,692.00

Reserve Now
A credit card that says airlanco on it
A blue fan is sitting in front of a stone wall.
A close up of a label on a blue motor.
A blue fan with a motor attached to it
A toshiba motor is sitting on a black surface

Load Out Auger

Year: Unknown

Estimated Value: Unknown

Reserve Now
A machine is sitting on the ground next to a wall.
A close up of a dodge motor with a label on it.

17”/10ft Sections Auger Screws
Approximately 1,500ft (Some newer than others)

Year: Unknown

Estimated Value: $1,000 New

Reserve Now
A measuring tape is being used to measure a pipe
A bunch of metal screws are sitting in the grass

2ft Diameter/20ft Long Drain Tile/Aeration 1500ft Available
Some with minor damage

Year: Unknown

Price: $12.00 per foot

Estimated Value: New @ $24.51 per foot

Reserve Now
A pile of black pipes stacked on top of each other.

Model:  Unknown 130ft

HP: 125hp

Year: Unknown

Price: $10,000

Estimated Value: Unknown

Reserve Now
A very tall building with a crane on top of it.
A large metal structure with stairs going up to the top of it
A man in a hat stands on top of a very tall building

130 ft Dry Lift Leg 

HP: 40HP

Price: TBD

Reserve Now
A row of silos are lined up next to each other

Bulk Dust Tank 12ft Diameter x 50ft Tall
(Not with Support Stand)

Year: Unknown

Price: TBD

Reserve Now
A large rusty silo is sitting in front of a large building.
A ladder is going up to a very tall building

Duroflow Model K 88 4509 R

Year: Approximately 2003

Value New: $9,094.23

Reserve Now
A close up of a rusty piece of equipment on the ground.
A blue pipe is laying on the ground next to a motor.
A motor is sitting on top of a piece of wood.
A close up of a us electrical motor label
A close up of a label on a rotary positive blower.
A picture of a duroflow 4509 blower on a website.

JC Cross Co UR-4 Silencer

Year: 2013

Purchased New on 08/07/2013 for $450.00

Replacement Cost 2024: $1047.38

Reserve Now
A blue pipe is connected to a machine in a room.

US Electrical Motor

Year: Approximately 2003 or later

Replacement Value: TBD


NO PICTURE

Reducer Gear Box 500ft Tunnel Belt

50 HP, 11.45 Ratio, 155 RPM, Date: 4/55

Reserve Now
A close up of a label for a motor reducer

Motor Gallery Belt 500ft

50 HP, 1750 RPM

Reserve Now
A label on a machine that says ' allis chalmers ' on it

Motor Gallery Belt 500ft

50 HP, 1760 RPM

Reserve Now
A label for an induction motor made by allis chalmers

Reducing Gear Box 500ft Gallery Belt
50 HP, 11.39 Ratio, Date: 10/56

Reserve Now
A label on a machine that says falk on it

Reducing Gear Box 500ft Gallery Belt

50 HP, 155 RPM, Date: 3/55

Reserve Now
A close up of a label for a folk motor reducer

Motor for 500ft Gallery Belt

50 HP, 1750 RPM

Reserve Now
A label on a machine that says ' induction motor ' on it

Motor for 3-Leg 160ft Lift Leg

100 HP, 1760 RPM

Reserve Now
A label that says ' norma design type frame ' on it

Motor for 3-Leg 160ft Lift Leg

125 HP, 1760 RPM

Reserve Now
A close up of a part number plate for a motor

Reducing Gear Box 160ft Lift Leg

125 HP, 52.926 Ratio, 1750 RPM

Reserve Now
A close up of a rusty metal sign that says foote bros

Texas Shaker

10 HP, 1730 RPM

Reserve Now
A green machine is sitting in a room next to a ladder.
A large green machine is sitting inside of a building.
A close up of a delco a.c. motor

Model and Serial # for Mechanical Sampler

Reserve Now
A label on a box that says intersystems on it
A machine is sitting in the middle of a room in a factory.

Model and Serial # for Mechanical Sampler

Reserve Now
A white label that says intersystems on it
A machine is sitting in a dirty room with a blue pipe coming out of it.

Motor for 200ft Lift Leg

150 HP, 1170 RPM

Reserve Now
A label for an induction motor made in the usa

Reducing Gear Box for 200ft Lift Leg

1170 RPM, 35 Ratio

Reserve Now
A sign that says ' link belt herringbone gear drive ' on it
A large machine is sitting in a room next to a window.

Motor for 200ft Lift Left

150 HP, 1170 RPM

Reserve Now
A close up of a label that says production motor on it
A large dirty machine is in a room next to a window

Reducing Gear Box 200ft Lift Leg

35 Ratio, 1170 RPM

Reserve Now
A sign that says ' link belt herringbone gear drive ' on it

Motor Reducer, Gear Box for Creep Motor

5 HP, 32.04 Ratio, 56 RPM, Date: 3/55

Reserve Now
A label for a milwaukee falk motor reducer

Motor, Hooks to Gear Box for Creep

5 HP, 1740 RPM

Reserve Now
A label that says induction motor on it

Motor for 160ft Lift Leg

Reducing Gear Box for 160ft Lift Leg

Reserve Now
A close up of a u.s. electrical motor 's label
A large motor is sitting on top of a wooden pallet.
A close up of a label on a piece of metal
A close up of a label that says falk on it

Motor for 500ft Long Conveyer Tunnel Belt, Reducer

(4 Total Available)

Reserve Now
A dirty motor is sitting in a dirty room
A close up of a metal plate that says chalmers on it
A plaque on a wall that says a.g.m.a. rating

Motor for 60ft Long Conveyer Belt

15 HP, 1740 RPM

Reserve Now
A large black motor is sitting on top of a pile of dirt.
A label that says ' allis chalmers ' on it

Motor for 50ft Long Conveyer Belt, Gear Box

15 HP, 155 RPM

Reserve Now
A person is cleaning a dirty motor with a shovel
A close up of a label for a falk motor reducer
A label that says ' allis chalmers ' on it

Motor for 60ft Long Conveyer Belt, Reducer

(2 Total Available)

Reserve Now
A close up of a siemens label on a machine
A close up of a dodge torque arm speed reducer

CC-S Agricultural Elevator Buckets

 Material: Virgin HDPE, Nylon or Urethane 

Nominal Size: 12x8
Length: 12 13/16

Projection: 8 15/16

Back Depth: 8 1/4

Reserve Now
A row of concrete pipes are lined up in a grassy field.

Idler Conveyor Belt Rollers

(206 Total Available)

 46" Long, 6" Diameter Rollers

Reserve Now
A row of metal pipes sitting on top of a gravel road.